Need more Flash for Raspberry Pi Pico RP-2040 Dislike the outdated Micro USB connector All these problems are solved by our RP2040-Plus now.
As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.
What’s different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.
And it is RP2040-Plus Board with Pre-Soldered Pinheader.
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 4MB of onboard Flash memory
USB-C connector, keeps it up to date, easier to use
Lithium battery recharge/discharge header, suitable for mobile devices
Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch
The castellated module allows soldering directly to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 X multi-function GPIO pins
2 X SPI, 2 X I2C, 2 X UART, 3 X 12-bit ADC, 16 X controllable PWM channels
Accurate clock and timer on-chip
Accelerated floating-point libraries on-chip
8 X Programmable I/O (PIO) state machines for custom peripheral support
Support C/C++，MicroPython: Comprehensive SDK, development resources, tutorials to help you easily get started
Compatible with most of the Raspberry Pi Pico add-on modules
Type C RP2040 pi pico with header pin.
Be the first to review “Raspberry Pi Pico RP-2040 Type-C”