No products in the cart.
- Frames, Lumenier
Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3” – Frame Kit
Lumenier QAV-S 2 Sub-250 Joshua Bardwell SE 3” – Frame KitThe Lumenier QAV-S 2 Sub-250 frame kit is designed for Freestyle FPV, featuring a 3″ QAV-S 2 frame with a mono plate for the arms and aluminum FPV camera plates.SKU: n/a - Grove, Robotics, Sensors
Grove Creator Kit – γ / 40
Grove Creator Kit γ contains 40 different functional Grove modules which help you quickly get started with Arduino and Raspberry Pi. With the full tutorials and all kinds of modules like analogue inputs, displays, sensors, displays, etc, you will not only learn electronics but also be able to create multiple practical projects of your own.
SKU: n/a - BETAFPV, Radios & Tx Rx
BETAFPV ELRS Micro Receiver
BETAFPV ELRS Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
SKU: n/a - CUAV, Radios & Tx Rx
CUAV P9 Radio Drone Telemetry
The CUAV P9 Radio Telemetry Module is a cutting-edge solution for UAV data link communication with 60km range of data transmission. Designed by CUAV, this module boasts high power, rapid frequency hopping, and exceptional reception sensitivity, making it a standout in UAV communication systems.
SKU: n/a - CUAV, GPS
CUAV NEO 3 GPS Module | GNSS U-blox M9N Drone Hardware
CUAV NEO 3 GPS Module
NEO continues the hardware design of NEO V2, upgrade the GNSS module to Ublox NEO M9N, supports Beidou, Galileo, Glonas and GPS receive at the same time, and the horizontal positioning accuracy is up to 0.7M. Integrated with safety switch, buzzer, RGB light.
SKU: n/a - CUAV, Flight Controller
CUAV Pixhawk V6X Flight Controller
CUAV V6X Features:
1–H7 Double-precision floating-point processor
2–High-performance ARM M3 coprocessor
3–Low noise Car-grade IMUs.
4–Triple redundant IMUs and dual redundant barometer designs.
5–Car-grade RM3100 magnetic compass
6–New built-in shock absorption design
SKU: n/a - Microcontrollers, NVIDIA®
NVIDIA® Jetson Orin™ Nano Super Developer Kit
NVIDIA Jetson Orin Nano Super Developer Kit is a compact edge AI board, built with Jetson Orin™ Nano 8GB module which delivers up to 67 TOPS AI performance––a 1.7X improvement over its predecessor(NVIDIA Jetson Orin Nano Developer Kit). It has a rich set of IOs including USB 3.2 Gen 2 ports, 2x M.2 Key M for SSD, pre-installed Wi-Fi module, and more.
SKU: n/a - FPV, Maestro
Maestro M51 Multi Frequency Video, Data & RC 3 in 1 Wireless Transmission System
The Maestro M51 is a highly integrated wireless transmission system designed for industrial drone applications. It can simultaneously transmit FHD video, data, and RC signals over long distances, with the M50 capable of reaching up to 7 km and the M51 up to 17 km. The system supports three frequency bands: 800MHz, 1.4GHz, and 2.4GHz, which can be selected via a web page or software. With rich interfaces including HDMI, SDI, CVBS, UART, SBUS, and Ethernet, it is versatile and suitable for various drone industry applications.
SKU: n/a - Arduino, Robotics
Arduino Alvik
Robot rover kits are one of the most tangible and interactive ways to teach STEAM education through coding, electronics, and robotics for students, allowing them to be creative and hands-on.
Arduino Alvik is a powerful and versatile robot car specifically designed for programming and robotics education.
Powered by Arduino Nano ESP32, Arduino Alvik offers a diverse learning path through different programming languages, including MicroPython, Arduino C, and block-based coding, and it enables different possibilities to explore robotics, IoT and AI.
SKU: n/a - 3d Printer, 3D Printing, Anycubic
Anycubic Kobra S1 Combo
Anycubic Kobra S1 Combo
Product Features
● CoreXY Construction with a Print Size of 250*250*250mm
● Stunning 4- or 8-color Printing
● Compatible with all Major Filaments
● 600mm/s Ultra-Fast Printing
● 44dB Ultra-Quiet Printing
● 320℃ Hotend, Easy to Disassemble, Anti-CloggingSKU: n/a - Frsky, Turnigy
Turnigy TWIN X14 ACCESS 2.4GHz Transmitter (Orange)
The Turnigy TWIN X14 is an exclusive HobbyKing offering, featuring a unique colour that sets it apart in the market. This robust radio system comes preloaded with HobbyKing planes, ensuring a seamless experience straight out of the box. It also boasts the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.
SKU: n/a - DJI, DJI & Accessories
DJI O4 Air Unit
DJI O4 Air UnitIn Stock! The DJI O4 Air Unit redefines video transmission with improved resolution, lower latency, and extended range. At just 8.2 grams, it integrates a 1/2-inch image sensor that records 4K/60fps video, delivering an ideal combination of performance and portability.SKU: n/a - Caddx, FPV, FPV/Action Camera
Walksnail Avatar HD Mini 1S Kit
Walksnail Avatar HD Mini 1S KitThe Walksnail Avatar HD Nano Camera / Mini 1S VTX Kit features a nano digital camera, antenna, and Mini VTX (with heat sink) that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator.SKU: n/a - DJI, DJI & Accessories, FPV
DJI O4 Air Unit Pro
DJI O4 Air Unit ProThe DJI O4 Air Unit Pro redefines video transmission with improved resolution, lower latency, and extended range. At just 32 grams, it integrates a 1 1/3-inch image sensor that records 4K/120fps video, delivering an ideal combination of performance and portability.SKU: n/a - Flight Controller Stack, GEPRC
GEPRC TAKER F745 BT 8Bit 60A STACK
The GEPRC TAKER F745 BT 8Bit 60A stack is the latest stack system developed by the GEPRC team. It features a high-performance STM32F745VGH6 chip with a Cortex-M7 core running at up to 216MHz, handling both racing and freestyle flights with ease. Its dual gyroscope setup, using MPU6000 and ICM42688-P, ensures precise control.
SKU: n/a - Radio Master, Radios & Tx Rx
RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver
Introducing the RadioMaster XR4 XrossBand Receiver – The Pinnacle of compact Dual-Band Performance
The XR4 Receiver is a cutting-edge true diversity dual-band receiver featuring dual LR1121 RF transceivers, designed to leverage the advanced ExpressLRS Gemini Xrossband protocol (Gem-X). It seamlessly supports both the 2.4GHz and Sub-G 900MHz bands, and its dual T-type antennas provide superior reception sensitivity and connection stability for optimal performance.
SKU: n/a - Flight Controller, Flight Controller Stack, Flywoo
Flywoo GOKU GN 745 45A AIO 32bit (MPU6000 ) V3
Since its launch, the GOKU GN745 AIO has stood as Flywoo’s top-tier AIO product, earning widespread acclaim from Betaflight, INAV, and Ardupilot enthusiasts. Now, we’re excited to introduce the latest upgrade in this series—the V3 version! The V3 boasts a new ESC two-in-one drive solution, enhancing the continuous current capacity to 45A and improving the overcurrent protection capability of the motor pads, resulting in a more powerful overall performance. Furthermore, the V3 version significantly advances in terms of convenience, featuring 4 new direct-plug Uart ports and adopting a Type-C interface for easier connectivity.
SKU: n/a - 3d Printer, 3D Printing, FLSUN
Flsun S1 Pro
Flsun S1 ProProduct Features:
• Epic Speed at 1200mm/s, Double Your Outcome
• Φ320*430mm Volume Unbound Your Creativity
• Max Hot End Temp. at 350℃, Open for High-Performance Materials
• Quieter down to 55dB yet Powerful: the New Cooling System
• Enjoy Fine Printing with FLSUN Algorithms 2.0 and AI InspectionSKU: n/a - Chargers & Power Supply, HOTA
HOTA T6 DC 300W PD 90W 15A 1-6S LiPo Battery Charger
The New Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.
SKU: n/a - Radio Master, Radios & Tx Rx
RadioMaster GX12 Dual-Band Gemini-X Radio Controller (M2)
The RadioMaster GX12 marks a new era in innovation and technology for high-performance radio controllers. Designed for drone racing, FPV flying, and video work, the GX12 prioritizes signal strength and reliability, ensuring you stay connected when it matters most. Whether for work or play, the GX12 embodies excellence in drone control. Welcome to the future of radio controllers—elevate your RC experience with the latest advancements in open-source technology and performance!
SKU: n/a
