About this product
The iFlight XING2 3110 is powerful Cinelifter motor with three KV’s options available: 900KV, 1250KV, or 1600KV. The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it’s translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
VIDEO: iFlight XING2 3110 – Overview, Thrust Tests & Flight Footage
- 5mm titanium alloy shaft, the strongest prop shaft ever!
- Smooth and long-lasting NSK 11x5x5 bearings
- Center slotted N52H curved arc magnets
- XING O-ring bearing gap protection
- Crash resistant 7075 aluminum bell
- Designed for 7/8/9″ Cinelifters
- Dynamically balanced
- Motor wires protector
THE NEW STANDARD
The XING series NextGen motors have become popular after the initial release in 2018 and became the new standard on the market. Was it the curved shape or the internal damping ring to protect the bearing, or was it the higher quality NSK bearings coupled with a higher grade titanium alloy shaft? iFlight has been copied and compared all these years, but now it’s time to set a new standard again! They are finally ready to announce our predecessor the XING2!
Due to the high quality materials used and the durable joint of bell and shaft, iFlight has been able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Early 2018 they started to put o-rings on the top of our bearings between motor bell and stator. This acts as an absorber if your bell or shaft has gone through crashing and keeps the bearing gap tight to reduce all those vibrations induced by high rpms! It can also reduce the axial impact force just enough to keep your bearings smooth and quiet. Experience, high quality 7075 bells, O-ring bearing protection and all the other features you’ve just seen on your original XING series are still built in a new shape and design!
- Wire length: 18AWG 260mm
- KV: 900KV/1250KV/1600KV
- Mounting pattern: 19x19mm
- Weight: 80g with short wire
- Stator Diameter: 38.72mm
- Configuration: 12N14P
- Prop shaft: CW thread
- Model: XING2 3110
- Input Volts: 33.6V
- 1x iFlight XING2 3110 Motor (Choose KV)
- 1x M5 Flange Nut
- 4x M3x10 screws