About this product
The new GEPRC Cinelog 20 2″ Frame Kit can be shuttled in a narrow space, and can be adapted to O3 VTX, and can also shoot shocking effects in a narrow space. The resigned camera gimbal can easily eliminate high-frequency vibration and jello issues. Soft connection damping design of the camera gimbal and can also be mounted with a naked GoPro base, which supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras. The flight controller mounting hole spacing is 25.5mm*25.5mm, which is compatible with various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm. The 9mm * 9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight more confident.
Features
- Supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras
- Camera gimbal can easily eliminate high-frequency vibration and jello issues
- Design the outer EVA damping ring to effectively reduce the impact force
- Flight controller mounting hole spacing is 25.5mm*25.5mm
- Combining aesthetics and engineering for compact design
- Soft connection damping design of the camera gimbal
- Shoots shocking effects in a narrow space
- Can be shuttled in a narrow space
- Can be adapted to O3 VTX
Specifications
- Flight controller: GEP-F4-35A AIO (mounting holes: 25.5mm×25.5mm)
- VTX mounting holes: 20mm x 20mm /25.5mm x 25.5mm
- Motor: 1303.5 (mounting holes: 9mm×9mm)
- Suitable propeller size: 2 inch propeller
- FC mounting holes: 25.5mm x 25.5mm
- Camera gimbal triangle plate : 1.5mm
- Motor mounting holes: 9mm x9mm
- Recomended Battery: 4S 660mAh
- Camera gimbal plate: 2.0mm
- FPV camera spacing: 20mm
- Motor plate gasket: 2.0mm
- Bottom plate: 1.5mm
- Wheelbase: 100mm
- Main plate: 2.5mm
- Propeller: 2 inch
- Weight: 53.4g
- ESC: 35A
Includes
PLATES
- 1 x Camera gimbal triangle plate: 1.5mm
- 1 x Camera gimbal plate: 2.0mm
- 1 x Motor plate gasket: 2.0mm
- 1 x Bottom plate: 1.5mm
HARDWARE
- 1 x Single-ended bright-edge aluminum column M2*3.5*28
- 1 x Single-ended bright-edge aluminum column M2*3.5*25
- 4 x M2*1.9-OD4.9 self-clinching nut-brass color M2
- 4 x Camera gimbal shock absorbing rubber ring
- 5 x Camera gimbal vibration dampening rubber
- 1 x 7075 Aluminum Column M2*3.5*28
- 1 x 7075 Aluminum Column M2*3.5*25
- 2 x Round head screw with pad M2*8
- 6 x Round head screw M2*4 X6
- 10 x Round head screw M2*12
- 4 x Round head screw M2*16
- 18 x Round head screw M2*7
- 18 x Round head screw M2*8
- 4 x Round head screw M2*5
- 4 x Half-round head M1.6*8
- 4 x Nylon column M2*5mm
- 10 x Self-clinching nut M2
- 4 x BEC silicone gasket
- 10 x Nylon nut M2
3D PRINTED PARTS
- 1 x VTX Antenna mount(small hole)
- 1 x VTX Antenna mount (big hole)
- 1 x Camera mount (2 holes)
- 1 x Camera mount (1 hole)
- 1 x TBS Antenna mount
- 1 x Receiver mount
- 1 x Receiver mount
INJECTION MOLDED PARTS
- 4 x Propeller guard
ACCESSORIES
- 1 x 4S Naked GoPro power cable (with balanced terminal head)
- 2 x Receiver antenna tubes 100mm
- 1 x L-shaped screwdriver 1.5MM
- 2 x 3M double-sided tape
- 1 x Naked GoPro 8 base
- 2 x Battery anti-slip pad
- 2 x Battery tie M15*150
- 4 x EVA damping ring
- 2 x Damping pad
- 1 x Keychain
There are no reviews yet.