Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX


Available on backorder

Eachine TX805 seems to have everything that quad VTX needs to have: TX can be easily mounted in the stack, has audio microphone on board, MMCX antenna connector, SmartAudio control, 40 channels and 5 switchable output power modes – Pit/25/200/600/800mW


Available on backorder

Brand name: Eachine
Model: Eachine TX805
Item name: FPV Transmitter VTX
Frequency: 5.8G
Channels: 40CH

Input  voltage: 7V~24V
5V camera supply: 120mA(MAX)—-25mW@12V
5V camera supply: 200mA(MAX)—-200mW@12V
5V camera supply: 300mA(MAX)—-600mW@12V
5V camera supply: 350mA(MAX)—-800mW@12V
Extra features: Smart audio
Power supply: 5V output for Camera
Output power: 25mW/200mW/600mW/800mW switchable
Antenna connector: MMCX
Cable connector: Solder pads
Dimensions: 36mm*22mm*5mm,30.5 stackable hole

Weight: 8g(excluding antenna)


1. Pitmode
2. Support Smart audio
3. 40 channels with MIC
4. Power failure memory
5. 25/200/600/800mw power switchable
6. Support OSD Configuring via Betaflight FC
7. One button frequency and power setup
8. 7-24V wide input voltage with 5V for camera,12V typical corresponding current value:
    25mw-120mA 200mw-200mA 600mw-300mA 800mw-350mA
9. Solid MMCX antenna connection and MMCX brass dipole antenna
Button control Channel select mode
Channel select
Select channels by simple short presses.
Blue LED light on stands for CH1,short presses to change 8 channels sequentially.
For CH2/3/4/5/6/7/8,Blue LED flicker once,it won’t light on.
Notice:Blue LED only light on for CH1
Band select
Press button for 2S,Red LED will flash,then short presses to select 5 bands.
Power select
Press button for 4S,Red LED will flash,then select power by simple short presses to select 25mW/200mW/600mW sequentially,For 200mW, Green LED flicker once,it won’t light on;For 600mW Blue LED flicker once,it won’t light on .Press the button again ,Red LED,Green LED and Blue LED lights together,Represents the highest power 800mW.
Notice:Red LED only light on for 25mW.
Pit Mode(0.01mW)
While in Pit Mode you can change channels and set power levels , but none of these changes will take effect until you quit Pit Mode.By default ,Pit Mode will send a very weak signal.
Two ways to exit pit mode:
Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.
Notice:The VTX has memory for settings,To change the settings ,please repeat steps as above.
Package included:
1 x Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter VTX
1 x Adapter connector cable (RP-SMA or SMA Female)
1 x MMCX Pigtail Antenna
1 x Instructions
1537176936 27 Robotonbd 1537176940 27 Robotonbd 1537176944 27 Robotonbd 1537176948 27 Robotonbd 1537176952 27 Robotonbd

?mid=&wid=51824&sid=&tid=8548&rid=LOADED&custom1=www.robotonbd.com&custom2=%2Fwp admin%2Fpost new.php&custom3=brounelink Robotonbd?mid=&wid=51824&sid=&tid=8548&rid=BEFORE OPTOUT REQ&t=1617239346784 Robotonbd?mid=&wid=51824&sid=&tid=8548&rid=FINISHED&custom1=www.robotonbd Robotonbd


Category: Tags: ,


?mid=&wid=51824&sid=&tid=8548&rid=LOADED&custom1=www.robotonbd.com&custom2=%2Fwp admin%2Fpost new.php&custom3=brounelink Robotonbd?mid=&wid=51824&sid=&tid=8548&rid=BEFORE OPTOUT REQ&t=1617239346801 Robotonbd?mid=&wid=51824&sid=&tid=8548&rid=FINISHED&custom1=www.robotonbd Robotonbd

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.